Please Note: 22ple Glass Coat Applicator (Double Sided) sold separately.
Sizing Recommendations:
30ml – Best for 2 – 3 applications to 2 or more vehicles.
50ml – Best for several applications to several vehicles
22ple Application Instructions:
Ensure the surface is cleaned & polished.
Remove all oil/polishes on the surface by doing an IPA (Isopropyl Alcohol) wipe down. Use a mixture of 50% Isopropyl Alcohol with 50% distilled water.
Please make sure the surfaces are cool and TOTALLY dry before applying the glass coat.
Pour a small amount of glass coat liquid onto the 22ple Glass Coat Applicator (Double Sided) and apply to the metal surface. Do not over-apply as it does not give you additional benefit, but it might make it difficult to remove.
Allow approximately 6~10 minutes of dwell time (at 25 degrees C / 77 degrees F) or slightly longer in colder (below 20 degrees C / 68 degrees F) ambient temperature. Lightly buff off all coating residue with a clean microfiber towel.
Allow approx. 4~6 hours for the coating to settle, reapply a second layer as necessary.
It is highly recommended to cure the coated surface under infrared curing lamp.
If you choose to cure the glass coat with the aid of infra-red curing lamp. You may use the following settings as a guideline: Set temperature at 65 degrees C / 150 degrees F, cure for between 6 to 8 minutes at a distance of 2 feet
Reviews
There are no reviews yet.